- Catalyst™ Control Center Component Video
- ATI Graphics Driver Un-install Enhancement
- SECAM TV Out Support
- 1080p HDTV custom mode
- HDMI Audio for non-standard TV modes
- Adaptive AA on OpenGL for Catalyst™ Control Center
- 1080p24 Mode Support
- Windows XP Service Pack 3 support
Catalyst™ Control Center Component Video
This
release of Catalyst™ introduces 480i and 480p support. These formats
will be found in the pre-defined component video format list found in
the Catalyst™ Control Center->Component Video->Advanced page.
ATI Graphics Driver Un-install Enhancement
This
release of Catalyst™ introduces an update to the ATI un-install
utility. The utility now pop up dialogue box to show two options to the
end user,
- Remove ATI Radeon™ graphics software, leave chipset software (RECOMMENDED).
- Completely remove all ATI/AMD (Graphics/Chipset) software.
SECAM TV Out Support
This release of Catalyst™ introduces support within the graphics driver to enable TV output adhering to the SECAM standard.
1080p HDTV custom mode
This
release of Catalyst™ 1080p HDTV display mode. This feature will be
available for display devices that use an HDMI connector and is
available under the Windows XP and Vista operating systems.
HDMI Audio for non-standard TV modes
This
release of Catalyst™ introduces HDMI audio support for all TV timing
modes and non-standard (CEA 861b) TV modes. If a non-standard mode is
used, on initial connection to the TV, a pop-up notification should let
the user know that the audio may be out of sync. A UI allows for the
audio to be disabled by the user if desired. The UI in Catalyst™
Control Center would show the list of TV timing modes (both standard
and non-standard) and the capability to enable audio for a given mode.
Adaptive AA on OpenGL for Catalyst™ Control Center
This
release of Catalyst™ introduces Adaptive AA for Orca Driver, geometry
for alpha tested objects are now submitted multiple times to the
hardware using the multi-sample mask feature to update one sample at a
time in the frame buffer using centroid sampling. With each pass of the
sampling position for textures is shifted to be at the location of the
sample that is being updated in that pass.
1080p24 Mode Support
This
release of Catalyst™ introduces 1080p24 mode support This feature will
be available for display devices that use an HDMI connector and is
available under the Windows XP and Vista operating systems.
Windows XP Service Pack 3 support
This
release of Catalyst™ introduces WHQL certified support for Microsoft's
Windows XP Service Pack 3 update for all ATI Radeon™ Series products.
Performance Improvements
The following performance gains are noticed with this release of Catalyst™.
- Call of Juarez DX10: Performance increases up to 12% on systems containing an ATI Radeon™ HD 3xx0 series of product
- Halo: Performance increases by 10-30% across all of the supported ATI Radeon™ series of products
- Lost Planet DX10: Performance increases from 5 to 35% on systems containing an ATI Radeon™ HD 3xx0 series of product
- Stalker DX9: Performance increases by 20-50% when HDR is enabled in the game; across all ATI Radeon™ HD38x0 series of products
- World
in Conflict DX10: Performance increases up to 25% on systems containing
an ATI Radeon™ HD36x0 and/or an ATI Radeon™ 38x0 series of product.
Higher performance gains are noticed on systems contianing an ATI
Radeon™ 3870x2 series of product
ATI's Folding@Home
Folding@Home
is a distributed computing project designed by the Stanford University.
The application performs intensive simulations of protein folding. This
simulation will help researchers uncover how certain diseases develop.
Folding@Home uses distributed computing to simulate protein folding,
the workload is broken up into small work units and distributed across
hundreds of thousands of computers over the internet. You can help find
the cure to many different diseases! To join Folding@Home, follow these
steps:
- Download ATI's Catalyst™ software suite
- Download the Folding@Home GPU client application
 | Note: | The latest GPU client supports the ATI Radeon™ HD 3xx0 series of products only. |
- Enter the ATI team number 51394 and start folding!
For more information on Folding@Home visit: http://ati.amd.com/technology/streamcomputing/folding.html
Resolved Issues for the Windows Vista Operating System
This
section provides information on resolved issues in this release of the
ATI Catalyst™ Software Suite for Windows Vista. These include:
- Clive Barker's Jericho:
Corruption is no longer noticed when playing the game on a system
containing an ATI Radeon™ HD 38x0 series of product and running the
Windows Vista operating system. Further details can be found in topic
number 737-34260
- Colin McRae: DiRT:
Setting the display to 1024x768 with AA set to 4x, and CrossFire™
enabled no longer results in lower performance being noticed. Further
details can be found in topic number 737-34254
- Crysis:
Flickering shadow corruption no longer occurs in hallways of the ship
when CrossFire™ is enabled. Further details can be found in topic
number 737-34256
- Doom 3:
Setting the in game options to Ultra Quality and the screen size to
1600x1200 no longer results in the image next to the text failing to be
rendered. Further details can be found in topic number 737-32603
- Farcry:
Enabling CrossFire™ no longer results in corruption being noticed
during the introduction of the game. Further details can be found in
topic number 737-34262
- Gears of War:
Launching the game under the 64 bit version of Windows Vista no longer
results in momentary corruption of the desktop. Further details can be
found in topic number 737-34261
- Enemy Territory Quake Wars:
Launch the game demo on a system containing an ATI Radeon™ X11x0 series
of product and running the Windows Vista operating system no longer
results in the operating system failing to respond. Further details can
be found in topic number 737-34199
- Halo 2:
Enabling AA in the Catalyst™ Control Center no longer results in the
Halo 2 logo flickering when loading or quitting a campaign. Further
details can be found in topic number 737-32541
- Hellgate:
London: Flickering is no longer noticed when quitting and then
relaunching the game when the in-game setting are set to their maximum
levels. Further details can be found in topic number 737-32604
- Monster Madness Battle for Suburbia:
Shading over 3D characters no longer results in flickering being
noticed. Further details can be found in topic number 737-34255
- Shrek:
The game no longer fails to launch on systems containing an ATI Radeon™
HD3100/3200 series of product and running the Windows Vista operating
system. Further details can be found in topic number 737-34197
- Stranglehold:
The game no longer fails to load on systems running the Windows Vista
operating system with default values enabled. Further details can be
found in topic number 737-34259
- Tabula Rasa:
Setting the graphics option to enable Deferred Lighting and Dynamic
Shadows no longer results in corruption being displayed. Further
details can be found in topic number 737-32597
- Team Fortress 2:
Enabling CrossFire™ and playing the game on a system running Windows
Vista no longer results in corruption being noticed. Further details
can be found in topic number 737-34257
- Tomb Raider Anniversary:
Performance improvement is now noticed when playing the game with
CrossFire™ enabled. Further details can be found in topic number
737-32598
- Connecting
a secondary display device using the HDMI connector and enabling either
clone mode or extended desktop mode no longer results in the WinDVD 7
player playing in a windowed mode on both display devices when Overlay
Theater Mode is enabled. Further details can be found in topic number
737-30579
- The
OverDrive™ page is no longer missing in the Catalyst™ Control Center
after disabling CrossFire™ support. Further details can be found in
topic number 737-31579
- Watching
live TV on a system running Windows Vista no longer results in
corruption being noticed after a short time period. Further details can
be found in topic number 737-33465
- Connecting
a TV as the secondary display device and enabling either clone mode or
extended desktop mode no longer results in the TV failing to display an
image when resuming from an S3 state. Further details can be found in
topic number 737-33466
- Connecting
a CRT and an HDMI display device followed by enabling clone mode and
setting the resolution to 1024x768 32bpp 60Hz. no longer results in
corruption being noticed on the secondary display device when resuming
from suspend mode. Further details can be found in topic number
737-32656
- The
signal on HDTV TV is no longer displayed as 480p60 after setting the
format to 576i25/576p50 in clone mode. Further details can be found in
topic number 737-32662
- Momentary flicker is no longer noticed when rotating the display device. Further details can be found in topic number 737-32661
- Flashes
of white lines are no longer noticed when quickly moving windows around
the Vista desktop. Further details can be found in topic number
737-32660
- Attempting
to perform a silent install of the display driver on a system running
Traditional Chinese version of Windows Vista no longer results in an
error message being displayed and the display drivers failing to be
installed. Further details can be found in topic number 737-32601
- Corruption
is no longer noticed on the Windows Vista desktop when playing a DVD
title when using the Windows Media Player. Further details can be found
in topic number 737-33383
- Connecting
multiple display devices no longer results in the primary, secondary
and other monitors swapping positions within the Catalyst™ Control
Center. Further details can be found in topic number 737-32543
- The secondary display device no longer fails to resume from sleep mode. Further details can be found in topic number 737-32534
- Connecting
a DFP display device to a system running Windows Vista (32 or 64 bit
versions) no longer results in the display modes of 1024x768, 800x600,
and 640x480 being missing in the Catalyst™ Control Center. Further
details can be found in topic number 737-32542
- A
warning message no longer fails to appear when using an inappropriate
DVI-HDMI adapter. Further details can be found in topic number 737-32596
- Hot
plugging an HDMI display device to a system running Windows Vista (32
or 64 bit version) no longer results in the HDMI display device being
detected as a DTV (DVI) device. Further details can be found in topic
number 737-32593
- The
color depth no longer changes to 8 bpp when enabling or disabling
CrossFire™ for the first time. Further details can be found in topic
number 737-31580
- Playing
DVD content using the Windows Media Player no longer results in the
playback being choppy. Further details can be found in topic number
737-32529
- Catalyst™
Control Center->Display Properties->Settings tab->Advanced:
The adapter information is no longer displayed as ATI Display Adapter
instead of the actual product name. Further details can be found in
topic number 737-32602
- Setting
the language option to any supported language other than English no
longer results in the Help file for Hydragrid failing to appear.
Further details can be found in topic number 737-32608
- The
Windows Vista operating system no longer fails to resume from suspend
mode when the HDMI display device is set to 1024x768 60Hz.on systems
containing an ATI Radeon™ HD 2400 series of product. Further details
can be found in topic number 737-32549
- Resuming
from an S3 state no longer results in the display continually blinking
on systems running the Windows Vista operating system (64bit version).
Further details can be found in topic number 737-31575
- Setting
the display resolution to 1920x1200, followed by playing a DVD title no
longer results in playback of the DVD appearing jittery. Further
details can be found in topic number 737-32535
- Connecting
a CRT as a secondary display device no longer results in the inability
to swap between a CV display device and a CRT display device. Further
details can be found in topic number 737-34325
- Attempting
to connect a TV using the S-Video connector no longer results in the TV
failing to be detected in the Catalyst™ Control Center. Further details
can be found in topic number 737-34328
- The
display mode of 1920x1200 is no longer removed from list modes
available for a connected CRT. Further details can be found in topic
number 737-34331
- The
Catalyst™ Control Center monitor page no longer displays incorrect
information on systems containing an ATI Radeon™ HD 3100/3200 series of
product. Further details can be found in topic number 737-34195
- German translation errors are now rectified for the Vista installer. Further details can be found in topic number 737-34196
- Enabling
Overlay Theatre Mode while a movie is playing no longer results in the
secondary display device displaying a black screen when extended desk
mode is enabled. Further details can be found in topic number 737-34198
- Connecting
a CRT and LCD display device, along with enabling clone mode and
setting the display resolution to 1280x1600 no longer results in
corruption being noticed. Further details can be found in topic number
737-34230
- Intermittent
corruption when switching between an LCD display device and an HDMI TV
no longer occurs. Further details can be found in topic number 737-34231
- The AMD Live Explorer carousel view no longer fails to load previews. Further details can be found in topic number 737-34232
- Attempting
to resume from suspend mode when playing a Blu-Ray title no longer
results in the Windows Vista operating system failing to respond.
Further details can be found in topic number 737-34233
- The
ATI Graphics Power Settings can now be changed in the Power options on
system running Windows Vista and containing an ATI Radeon™ HD 2400
series of product. Further details can be found in topic number
737-34234
- Connecting
an HDMI display device no longer results in the display failing to fit
the screen properly when setting the display resolution to 1920x1200.
Further details can be found in topic number 737-34251
- The
display formats of 720p and 1080i are no longer displayed in the
Catalyst™ Control Center when using a display device that does not
support the modes. Further details can be found in topic number
737-34252
- Connecting
a secondary display device and setting the display resolution to
1280x800 or greater no longer results in corruption being noticed when
attempting to enable extended desktop mode. Further details can be
found in topic number 737-34253
- Toggling
a DX9 application between windowed mode and full screen mode on systems
containing an ATI Radeon™ HD 36x0 series product and running the
Windows Vista operating system no longer results in the operating
system failing to respond. Further details can be found in topic number
737-34258
- Enabling
CrossFire™ no longer results in the ability to swap between display
devices. Further details can be found in topic number 737-34263
- Hot-plugging
and hot-unplugging an HDMI display device no longer results in the
Catalyst™ Control Center failing to detect the correct setting of the
display device. Further details can be found in topic number 737-34267
- Condition
Zero and Google Earth no longer fail shortly after starting the
applications on systems running Windows Vista. Further details can be
found in topic number 737-34269
- Disabling
the ATI graphics driver no longer results in the Windows Vista
operating system failing to respond when using an ATI Radeon™ HD 2600
series of product. Further details can be found in topic number
737-34270
- Hot
swapping a display device to the second DVI connector no longer results
in the display device failing to be detected. Further details can be
found in topic number 737-34271
- Setting
the display resolution to 1360x768 or higher and attempting to play a
Blu-Ray or HD DVD title using the Cyberlink player no longer results in
the player displaying a blank screen. Further details can be found in
topic number 737-34272
- Enabling
Closed Captioning no longer results in a green line at left side and
bottom of the text being noticed. Further details can be found in topic
number 737-34273
Resolved Issues for the Windows XP Operating System
This
section provides information on resolved issues in this release of the
ATI Catalyst™ Software Suite for Windows XP. These include:
- Crysis:
Catalyst™ Control Center->Advanced View->3D: Setting the standard
setting to Optimal Quality and having certain in-game settings no
longer results in missing textures being noticed when playing the game
under either Windows XP (32 bit version) or Windows Vista (64 bit
version). Further details can be found in topic number 737-34163
- DIRT:
Launching DIRT with CrossFire™ enabled no longer results in the
application failing to launch and an error message being displayed
737-29554
- Company of Heroes:
Opposing Fronts: The game no longer runs out of virtual memory and no
longer fails to load on systems containing an ATI Radeon™ X1650 series
of product and running Windows XP Professional x64 Edition operating
system. Further details can be found in topic number 737-34148
- Lost Planet: Setting AA to either 4x or 8x no longer results in the game failing to respond 737-28492
- SecondLife:
Corruption is no longer noticed when AA is enabled on a system
containing an ATI Radeon™ HD 2600 series of product and running Windows
XP. Further details can be found in topic number 737-34149
- Tiger Woods 2008:
Corruption is no longer noticed when playing the game with Adaptive AA
enabled. Further details can be found in topic number 737-34163
- World of Warcraft:
Connecting an Apple 30" display device to a system containing an ATI
Radeon™ HD 26x0 series of product and running Windows XP no longer
results in poor performance and intermittent flashing display. Further
details can be found in topic number 737-32576
- World of Warcraft:
Playing the game in a windowed mode under Windows XP no longer results
in the game failing to respond when attempting to go full screen.
Further details can be found in topic number 737-32586The floppy drive
no longer fails to read or write under Vista on a Dell XPS410 system.
Further details can be found in topic number 737-31148
- World of Warcraft: Poor performance and flashing on screen are no longer noticed. Further details can be found in topic number 737-32584
- A
warning message no longer fails to be displayed when reaching the
maximum number of modes in the Predefined and Custom HDTV modes section
of the Catalyst™ Control Center. This issue may also be experienced
under the Windows Vista and XP Professional x64 Edition operating
systems. Further details can be found in topic number 737-33468
- Underscan
no longer fails when setting the display device to either 1080i 25Hz or
1080i 50Hz. Further details can be found in topic number 737-33469
- Running
the Spanish version of the Windows operating system no longer results
in the Catalyst™ Control Center option failing to be available when
right-clicking the Windows desktop menu bar. Further details can be
found in topic number 737-32557
- Setting
the language option to French for the Catalyst™ Control Center no
longer results in some translation errors being noticed through-out the
Catalyst™ Control Center. Further details can be found in topic number
737-32665
- Setting
the language option to German for the Catalyst™ Control Center no
longer results in some translation errors being noticed through-out the
Catalyst™ Control Center. Further details can be found in topic number
737-32664
- Setting
the language option to Russian for the Catalyst™ Control Center no
longer results in some text being cropped for the secondary display
device in the display properties. Further details can be found in topic
number 737-32663
- Rebooting
the operating system after changing the skin to any available option
other than system skin no longer results in the Catalyst™ Control
Center menu options may no longer being visible 737-30569
- The 3D aspect no longer appears blank when launching a second instance of the Catalyst™ Control Center 737-28482
- Setting
the language option to any supported language other than English no
longer results in the Help file for Configure and Diagnostics failing
to appear. Further details can be found in topic number 737-32605
- Enabling
or disabling CrossFire™ no longer results in the HydraGrid settings
failing to be retained. This issue may also have been experienced under
the Windows XP and Windows XP Professional x64 Edition operating
systems. Further details can be found in topic number 737-32609
- Connecting
a CRT and TV and enabling either clone mode or extended desktop no
longer results in Overlay Theater Mode failing on the secondary display
device when attempting to change the TV format to D/PAL. Further
details can be found in topic number 737-32606
- Selecting
either Ultimate Dutch or Swedish under no longer results in an error
message being displayed when select help within the Catalyst™ Control
Center. Further details can be found in topic number 737-34413
- CrossFire™
no longer fails to be enabled when extended desktop mode is enabled and
the displays are connected to the same adapter until the system is
restarted. Further details can be found in topic number 737-34414
- Connecting
an HDMI display and a DVI display no longer results in the maximum
resolution of the HDMI display failing to be available in the Catalyst™
Control Center when running the Chinese version of Windows XP. Further
details can be found in topic number 737-34415
- The
Catalyst™ Control Center no longer fails to respond when modifying or
assigning any hotkey in Hotkeys Manager. Further details can be found
in topic number 737-34416
- Catalyst™
Control Center: Connecting a secondary display device and enabling
extended desktop mode no longer results in the Catalyst™ Control Center
failing to respond when disabling the primary display device and
attempting to set the secondary display device as the primary. Further
details can be found in topic number 737-34417
- Changing
the language to Swedish no longer results in text cutoff occurring when
rotating the display device. Further details can be found in topic
number 737-34418
- Various text is no longer cropped in the Catalyst™ Control Center. Further details can be found in topic number 737-34419
- Avivo:
The Advanced Color preview picture now changes when the Avivo settings
are adjusted. Further details can be found in topic number 737-34421
- Connecting
a secondary display device (DFP) no longer results in the DVI panel not
being displayed in the Catalyst™ Control Center. Further details can be
found in topic number 737-34422
- Connecting
a CV/TV as a single display using either a smart dongle or dumb dongle
no longer results in the CrossFireX™ option being available to activate
it in the Catalyst™ Control Center. Further details can be found in
topic number 737-34423
- The
Avivo Video->Presets page no longer displays a blank screen when
exiting from the screen saver when the Catalyst™ Control Center active.
Further details can be found in topic number 737-34424
- Connecting
a TV as the primary display device and making changes to any of the
contrast, saturation, S-video sharpeness no longer results in the
options taking affect even though the discard button is clicked.
Further details can be found in topic number 737-34425
- Text
is no longer cropped in the Catalyst™ Control Center->All Setting
when setting the language to DE. Further details can be found in topic
number 737-34426
- The
Apply button no longer fails to become disabled when changing the
display resolution on a system with extended desktop mode enabled and
the secondary display device having a different color scheme. Further
details can be found in topic number 737-34427
- Catalyst™
Control Center->Advance View->3D->All Settings->Anti
Aliasing making changes to the default AA settings no longer results in
the default values failing to be applied when clicking on the Defaults
button. Further details can be found in topic number 737-34428
- A
corrupt background is no longer noticed when in the OverDrive™ option
of the Catalyst™ Control Center when changing the Catalyst™ Control
Center skin to any available option other than system. Further details
can be found in topic number 737-34429
- The
tool tips now reference the correct video presets for the adjustment
options. Further details can be found in topic number 737-34430
- Help
for Anti-Aliasing aspect is now updated with Edge-detect filter
details. Further details can be found in topic number 737-34431
- Help
is now available for the Catalyst™ Control Center->CV-Scaling
Option. Further details can be found in topic number 737-34432
- The
enable/disable HydraGrid option in the system tray is now functioning
as expected. Further details can be found in topic number 737-34433
- Connecting
an HDMI display device to a system containing an ATI Radeon™ HD
3100/3200 series of product no longer results in the display failing to
be detected as a DTV(HDMI) in the Catalyst™ Control Center. Further
details can be found in topic number 737-34143
- Hot
un-plugging a display device no longer results in display device still
appearing in the Catalyst™ Control Center->Display Manager. Further
details can be found in topic number 737-34153
- Hot-unplugging
the primary display device (HDMI) no longer results in the secondary
display device (DP) failing to display an image under the Windows XP
operating system. Further details can be found in topic number 737-34161
- Adjusting
the flicker removal in the TV properties of the Catalyst™ Control
Center no longer results in corruption being noticed. Further details
can be found in topic number 737-34162
- Corruption
is no longer noticed during HD-BD playback and panning mode is enabled.
Further details can be found in topic number 737-34164
Resolved Issues for the Windows XP Professional x64 Edition Operating System
This
section provides information on resolved issues in this release of the
ATI Catalyst™ Software Suite for Windows XP Professional x64 Edition.
These include:
- Crysis:
Corruption is no longer noticed when playing the game on a system
running Windows XP Professional x64 Edition and containing an ATI
Radeon™ HD 3870 series of product. Further details can be found in
topic number 737-34141
- Unreal Tournament 3:
Changing the in-game display resolution may result in corruption being
noticed. Further details can be found in topic number 737-33470
Known Issues Under the Windows Vista Operating System
This
section provides information on known issues that may be experienced
under the Windows Vista operating system with the latest version of
Catalyst™. These include:
- Company of Heroes:
Setting the in-game options to maximum levels may result in the game
exiting to the desktop after the game has completed loading. Further
details can be found in topic number 737-34137
- Crysis:
Momentary corruption may be noticed in the body of water when a soldier
pierces through the clouds. Further details can be found in topic
number 737-32599
- Unreal Tournament 3:
The game may intermittently fail to launch when a map has texture
detail set to maximum. Further details can be found in topic number
737-31189
- ZT:
Attempting to play the Asian game in a windowed mode or at a display
resolution of 1280x1024 may result in the game failing to respond.
Further details can be found in topic number 737-34152
- Rebooting
the operating system after changing the skin to any available option
other than system skin may result in the Catalyst™ Control Center menu
options no longer being visible. Further details can be found in topic
number 737-30569
- The
Catalyst™ Control Center menu option may fail to function when changing
the skin from system skin to any other available skin. Further details
can be found in topic number 737-30570
- Using
the hot-key function to switch between various display scenarios may
result in the HDMI display device displaying a blank screen. Further
details can be found in topic number 737-31145
- The
secondary HDMI Display may turn off when resuming from an S1
hibernation with an HDMI display connected. Further details can be
found in topic number 737-31146
- Setting
the desktop resolution to 1600x1200 or greater may result in green
pixel corruption being noticed when playing certain games. This issue
maybe noticed when using a system running Windows Vista and containing
an ATI Radeon™ HD 2600 or HD 2400 series of product. Further details
can be found in topic number 737-31150
- Attempting
to play the HD-DVD title Harsh Times, School for Scoundrels using the
Cyberlink player may result in block corruption being noticed. Further
details can be found in topic number 737-31155
- Enabling
CrossFire™ on a system containing an ATI Radeon™ X1900 CrossFire™
Edition product may result in the Windows Vista (64 bit version)
failing. Further details can be found in topic number 737-31163
- An
error message may appear when installing the display driver package
through setup.exe. Further details can be found in topic number
737-31577
- Inconsistent
behavior may be noticed in the Catalyst™ Control Center when clearing
the Shared application from one virtual desktop to another. This issue
may also be experienced under the Windows XP and Windows XP
Professional x64 Edition operating systems. Further details can be
found in topic number 737-32610
- Shared
applications may be removed after selecting Restore desktop when
virtual desktop mode is enabled. This issue may also be experienced
under the Windows XP and Windows XP Professional x64 Edition operating
systems. Further details can be found in topic number 737-32611
- Installing
an ATI Radeon™ X1600 series of product into a system containing an ATI
Radeon™ HD 2600 series of product with the display driver already
installed may result in the operating system entering a continuous
reboot. This issue may be averted by removing the ATI graphics driver
prior to the installation of the ATI Radeon™ X1600 series of product.
This issue may also be experienced with the ATI Radeon™ X1300 and 1550
series of products. Further information may be found in topic number
737-33471
- Certain
benchmark applications may report lower benchmark scores with
CrossFire™ enabled. Further details can be found in topic number
737-33464
- Hot-plugging
an HDTV to an HDMI port may result in flickering being noticed around
the text of the Catalyst™ Control Center when setting the display
resolution to either 1776x1000 or 1920x1000. Further details can be
found in topic number 737-34323
- Enabling
clone mode followed by switching to extended desktop mode may result in
the Windows Vista (64 bit version) failing to respond. Further details
can be found in topic number 737-34125
- The
OverDrive™ option may be missing in the Catalyst™ Control Center after
the installation of the graphics driver on systems containing an ATI
Radeon™ HD 2900 series of product and running the Windows Vista
operating system. Further details can be found in topic number 737-34123
- A
black window may be displayed when attempting to play a DVD title using
WinDVD 7 when Overlay Theater Mode and clone mode is enabled. Further
details can be found in topic number 737-34133
- Performing
a custom install of the ATI graphics driver under the Windows Vista
operating system may result in a message indicating that the current
version is not installed. Further details can be found in topic number
737-34150
- Attempting
to hot plug an HDMI display device from one port to another may result
in the display failing to display an image. Further details can be
found in topic number 737-34151
Known Issues Under the Windows XP Operating System
The
following section provides a summary of open issues that may be
experienced under the Windows XP operating system in the latest version
of Catalyst™. These include:
- Enemy Territory: Quake Wars
may have corruption on the water and sky after increasing the game
resolution. Restarting the game at that higher resolution or issuing
reloadImages command in the game console corrects the corruption. This
issue only impacts graphics cards up to the ATI Radeon™ X850. Further
details can be found in topic number 737-29947
- Connecting
a CRT display device as the secondary display and playing a Blu-ray DVD
using a Cyberlink player may result in no video playback if extended
desktop mode is enabled. Further details can be found in topic number
737-30587
- Connecting
a Dual Link Panel to the on-board DVI port, followed by hot plugging a
DVI display to the add-on DVI card may result in clone mode becoming
disabled when rebooting the machine and the secondary display device
remaining blank. Further details can be found in topic number 737-31166
- The
Catalyst™ Control Center menu option may fail to function when changing
the skin from system skin to any other available skin. Further details
can be found in topic number 737-30570
- Setting
the display resolution to 1440x900 or lower may result in corruption
being noticed when playing a DVD title. Further details can be found in
topic number 737-31168
- Connecting
a CRT display device as the secondary display and playing a Blu-ray DVD
using a Cyberlink player may result in no video playback if extended
desktop mode is enabled. Further details can be found in topic number
737-30587
- Intermittent
flashing may be noticed in the right portion of the display when
playing a 720p or 1080i media file when using the Windows Media Player
v10. Further details can be found in topic number 737-32666
- The
ATI OpenGL driver may fail to be applied on systems containing an ATI
Radeon™ 3600/3650 AGP series of product. Further details can be found
in topic number 737-33467
- Intermittent
flashing may be noticed in the right portion of the display when
playing a 720p or 1080i media file when using the Windows Media Player
v10. Further details can be found in topic number 737-34111
- The
Rotation option may not be available for the primary display device
when two or more display devices are connected to the system. Further
details can be found in topic number 737-34113
- Moving
the Realplayer to the secondary display device may result in the
playback windows appearing black. Further details can be found in topic
number 737-34116
- Moving
the WinDVD player to the secondary display device may result in the
playback window appearing blank. Further details can be found in topic
number 737-34120
- Connecting
a CRT display device as the secondary display and playing a Blu-ray DVD
using a Cyberlink player may result in no video playback if extended
desktop mode is enabled. Further details can be found in topic number
737-34121
Known Issues Under the Windows XP Professional x64 Edition
The
following section provides a summary of open issues that may be
experienced under the Windows XP Professional x64 Edition operating
system in the latest version of Catalyst™. These include:
- Running
an OpenGL application and attempting to rotate the desktop may result
in corruption being noticed. Further details can be found in topic
number 737-29556
For further information and general help on software driver installation, game issues, and more, visit ATI Customer Care.
Installing the Catalyst™ Vista Software Driver
Installation information can be found at:ati.amd.com
AMD Customer Care
The
AMD Customer Care website provides a high level of technical support
and ease of navigation. The AMD Customer Care website provides accurate
and up-to-date product support for optimum usability and performance.
Technical issues are categorized and personalized to enhance user
experience. The AMD Customer Care Website can be found at: support.ati.com
To view a known issue or find troubleshooting information, do the following:
- Go to ati.amd.com. The AMD home page is displayed.
- Click on Support & Drivers. The AMD Support and Drivers web page is displayed.
- In the left hand pane, select Graphics Support.
- In
the top right corner of the Graphics Support page, enter the topic
number or a general description of the issue you are experiencing
within the search field.
- In the Select Site field, select ATI.
- Click the SEARCH symbol.
The information requested (if available) is displayed.
Catalyst™ Crew Driver Feedback
This
driver release incorporates suggestions received through the Catalyst™
CREW Driver Feedback program. To provide us with your feedback, visit: Catalyst™ Crew Driver Feedback.
